Set Up Rate Limiting; Use Browser-Based Access To Set Up Rate Limiting - NETGEAR GSS108E-100EUS User Manual

ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
9. Click the APPLY button.
Your settings are saved.

Set Up Rate Limiting

You can limit the rate at which the switch accepts incoming data and the rate that it
retransmits outgoing data. The rate choices vary depending on the switch model.
Rate limiting can be set for a port in addition to other QoS settings. If the port rate limit is set,
the switch restricts the acceptance or retransmission of data to the values configured.

Use Browser-Based Access to Set Up Rate Limiting


To set up rate limiting:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Browser on page 14.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. Select QoS > Rate Limit.
Optimize Performance With Quality of Service
35
Access the Switch Using a Web