!4
AFFIX DUPLICATE DATA LABEL SOMEWHERE
ACCESSIBLE & PLUG COOKTOP IN
Duplicate data label
To check that the ignition system operates correctly, light each burner by itself, then all burners in combination.
●
Check for a well-defined blue flame without any yellow tipping.
●
If any abnormality is evident, check that the components of the burner assembly are located properly
●
If proper operation cannot be obtained, contact Customer Care or your nearest F&P Authorized Service Center.
●
The cooktop must not be used by the customer until proper operation has been achieved.
●
INSTALLATION INSTRUCTIONS
!6
Lifting off
Yellow tip
TEST OPERATION
Good flame
!5
FIT PAN SUPPORTS
10