Test Operation - Fisher & Paykel CG365D Installation Instructions Manual

Gas cooktop
Table of Contents

Advertisement

Available languages

Available languages

15
AFFIX DUPLICATE DATA LABEL SOMEWHERE
ACCESSIBLE & PLUG COOKTOP IN
Duplicate data
label

TEST OPERATION

17
To check that the ignition system operates correctly, light each burner by itself, then all burners in
combination.
Check for a well‐defined blue flame without any yellow tipping.
If any abnormality is evident, check that the components of the burner assembly are located properly
If proper operation cannot be obtained, contact Customer Care or your nearest F&P Authorized
Service Center.
The cooktop must not be used by the customer until proper operation has been achieved.
lifting off
yellow tip
good flame
16
FIT PAN SUPPORTS
Ensure the pan supports are located securely
and in the correct orientation (refer to User guide)
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cg365d series

Table of Contents