Test Operation - Fisher & Paykel CG302D Installation Instructions Manual

AFFIX DUPLICATE DATA LABEL SOMEWHERE
15
ACCESSIBLE & PLUG COOKTOP IN
Duplicate data
label

TEST OPERATION

17
To check that the ignition system operates correctly, light each burner by itself, then all burners in
combination.
Check for a well‐defined blue flame without any yellow tipping.
If any abnormality is evident, check that the components of the burner assembly are located properly
If proper operation cannot be obtained, contact Customer Care or your nearest F&P Authorised
Service Centre.
The cooktop must not be used by the customer until proper operation has been achieved.
lifting off yellow tip
good flame
16 FIT PAN SUPPORTS
Ensure the pan supports are located securely
and in the correct orientation (refer to User guide)
16