!4
AFFIX DUPLICATE DATA LABEL SOMEWHERE
ACCESSIBLE & PLUG COOKTOP IN
Duplicate data label
To check that the ignition system operates correctly, light each burner by itself, then all burners in combination.
●
Check for a well-defined blue flame without any yellow tipping.
●
If any abnormality is evident, check that the components of the burner assembly are located properly
●
If proper operation cannot be obtained, contact Customer Care or your nearest F&P Authorized Service Center.
●
The cooktop must not be used by the customer until proper operation has been achieved.
●
11
INSTALLATION INSTRUCTIONS
!6
Lifting off
Yellow tip
Ensure the pan supports are located securely
and in the correct orientation (refer to User guide)
TEST OPERATION
Good flame
!5
FIT PAN SUPPORTS
Model may vary