Table of Contents
Advertisement
3.1 Using the Network Scanner Driver
3
42
Other Scanners
Display scanner names existing in other networks. Since scanners can only be identified
and displayed automatically in the same network, enter the IP address and scanner name
here for scanners in other networks. However, if communication is not succcessful with
the added scanners when using TCP/IP, they cannot be used.
You should set up the scanner so that it can be used in TCP/IP environment when
connecting with the Document Centre which is already connected with other network.
1. Click the Display other network scanner checkbox.
2. Click Add.
3. Enter the IP address of the Document Centre to be connected and the corresponding
scanner name, then click OK.
Advertisement
Table of Contents
