Man-Down And No-Movement Alarm; Acoustic Location Signal - Avaya 3740 User Manual

The telephone receives a notification that the alarm has been received by the system. This
●
is a system dependent feature.
An ALS is played. See
●
A call to a predefined number is established, see
●
alarm on page 90.
Note:
When the vibrator is enabled, the telephone will alternate between vibration and
Note:
sound. That is, vibration and sound are not activated simultaneously.
The ALS will no be played if the Automatic call after alarm option is enabled.

Man-Down and No-Movement Alarm

Man-down alarm: If the telephone is tilted 45º (default) or more for a preset time (default 7
seconds), the Man-down alarm is triggered.
No-movement alarm: If no movement is detected during a preset time (default 30 seconds), the
No-movement alarm is triggered.
When an alarm is triggered, the following occur depending on the settings:
A dialog window "Man-down warning. Cancel?" or "No- movement warning. Cancel?" is
●
shown in the display, and a warning tone is also played for a period (default 7 seconds)
before the alarm is sent.
To prevent the alarm from being sent and to silence the warning tone, do one of the
●
following:
Press any key or button. The alarm is reset.
●
Put the telephone in a charger. The alarm is temporarily disabled, and the
●
corrensponding alarm icon is hidden. The alarm is enabled when you remove the
telephone from the charger.
If no key or button is pressed during the warning tone, the alarm is sent. Depending on set
●
parameters, a beep, vibrator, or LED signal confirms that the alarm has been sent.
An ALS may be activated after the alarm has been sent. See
●
page 89.
A call to a predefined number is established. See
●
alarm on page 90.

Acoustic location signal

Depending on set parameters, the ramped up ALS is played after an alarm. The signal is always
ramped from the lowest volume to the highest. Press the Mute button
Avaya 374x DECT Telephones - User Guide
Acoustic location signal
Alarm operations for 3749 telephones
on page 89.
configuring an automatic call after an
Acoustic location signal
configuring an automatic call after an
to turn the ALS off.
on
89
3/2013