Information Codes - Samsung SDC18809 User Manual

troubleshooting

INFORMATION CODES

Information codes may be displayed to help you better understand what is occurring with your Dryer.
ERROR DISPLAY
tE2
tE4
dE
dF
bE
hE
Et
3E
5E
For any codes not listed above, or if the suggested solution doesn't fix the problem, call your Samsung
Service Centre or local Samsung dealer.
30_ troubleshooting
SDC18809X-02805K-05_EN.indd Sec6:30 SDC18809X-02805K-05_EN.indd Sec6:30
MEANING
Clogged filter case is restricted.
Running the dryer with door open
Door is not closing properly
Button stuck for more than 30 secs
Clogged filter case is restricted.
Invalid heating Temp when running
the dryer.
EEPROM is not communicating
properly
The motor does not work properly.
The water tank is full of water.
The drain pump is out of order.
SOLUTION
Clean the filter case or condenser.
If the problem continues call for service.
Close the door and then restart.
If the problem continues call for service.
Call for service.
Make sure a button is NOT being pressed
continuously. Try restarting the cycle.If the
problem continues, call for service.
Clean the filter case or condenser.
If the problem continues call for service
Try restarting the cycle.If the problem
continues call for service.
Try restarting the cycle.If the problem
continues call for service.
Empty the water tank and start again.
If the problem continues call for service.
2013-07-04 2013-07-04 2:24:39 2:24:39