Installing Optional Speckled Stones - Montigo P42DF Installation & Maintenance Manual

Installing the Driftwood Log Set
The P42DF* has the option of installing a drift wood log set. Once the
firestones or speckled stones have been installed the log set can be
installed.
Ensure logs are securely placed and will not tip or fall. Remove media
where logs touch the burner tray to ensure a more secure position.
Lean the logs against the back panels. NO LOGS SHOULD LAY ACROSS
OR OVER TOP OF THE BURNER PORTS ON THE SURFACE OF
THE BURNER.
Step 1. Remove the glass door as described in the
previous section.
Step 2. Ensure selected media is installed per
instruction as per Figures 24 - 24f or 25 - 25a.
Step 3. Unpack the logs and handle with care.
1 2 3
Figure 26.
2 3
1
Figure 26a.
Step 4. Place Log 3 from LGS58 in the back right corner
of the burner tray. Ensure log does not cover ports.
Place Log 2 of LGS58 on top of log 3.See Figure 25b.
XG0195 -150204.2
Installation
LGS58
5
4
LGS59
4 5 6
2
Ports
Figure 26b.
Step 5. Place Log 5 from LGS58 on top of Log 2. Place
Log 1 from LGS58 on top of log 2, see figure 25c
Ports
Figure 26c.
6 Pilot
Ports
Figure 26d.
Step 6. Place log 6 of LGS59 across of log 1 of LGS58,
see figure 25e.
Ports
Figure 26e.
P42DF* Indoor Gas Fireplace
1
5
6
Page 25