Biis Indication; Priority A Channel Selection; Biis Operation - Icom iC-F3062T Instruction Manual

BIIS indication

■
The following indications are available for the BIIS operation
on a BIIS channel.
CONNECT : Individual/group call is successful.
: Message (status or SDM) transmission is suc-
OK
cessful.
: No answer back is received.
FAILED
: Appears during retry of the call (2nd call).
WAIT
CLR DOWN : End the communication.
: Operating channel is in the busy condition.
BUSY

Priority A channel selection

■
When one of the following operations is performed, the trans-
ceiver selects the Priority A channel automatically.
Priority A is selected when;
• Clear down signal is received/transmitted
- Set the 'Move to PrioA CH' item as 'Clear down.'
• Turning the power ON
The Priority A channel is selected each time the trans-
ceiver power is turned ON.
• Status call
The Priority A channel is selected when transmitting a
status call.
- Enable the 'Send Status on PrioA CH' item in the BIIS
configuration.
4

BIIS OPERATION

4
27