Biis Indication; Priority A Channel Selection; Operation - Icom IC-F50V SERIES Operating Manual

I BIIS indication
The following indications are available for the BIIS operation on an
MSK channel.
CONNECT : Individual/group call is successful.
OK : Message (status or SDM) transmission is successful.
FAILED : No answer back is received.
WAIT : Appears during retry of the call (2nd call).
CLR DOWN : End the communication.
BUSY : Operating channel is in the busy condition.
I Priority A channel selection
When one of the following operations is performed, the transceiver
selects the Priority A channel automatically.
Priority A is selected when;
• Clear down signal is received/transmitted
- Set the "Move to PrioA CH" item as "Clear Down."
• Turning the power ON
The Priority A channel is selected each time the transceiver
power is turned ON.
• Status call
The Priority A channel is selected when transmitting a status
call.
- Enable the "Send Status on PrioA CH" item in the MSK configura-
tion.
2

OPERATION

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
17