Table of Contents
Advertisement
Accessories for your 2Touch Board
Accompanying your 2Touch board is a wall mount kit containing four
aluminium angle brackets and fasteners to secure these to the wall.
If you have purchased the board is part of a "ready to install" pack, then the
following items are also included in the package:
Epson EB450We
Powered USB Hub
2T_MCS_1
2T_Audio015
Depending on the order, various package upgrade options are available:
2T_MCS_1 to 2T_MCS_2
2T_Audio015 to
2T_Audio014
Powered Hub to Cat5USBXtn
Copyright 2Touch Technologies Limited 2007-2008. All rights reserved.
Epson ultra short throw & bracket, 3000 lumens
Powered 4 port USB hub
Single gang Modular Connector System: fits three
snap-in modules (1 x USB-B, 1 x RCA-1, 1 x
VGA+3.5mm). Includes pre-terminated cables fixing
direct to faceplate: 5m VGA Cable; 5m RCA video;
3m 3.5mm Stereo mini; USB.
Wall Mounted Speakers with 30 Watt room amplifier.
One"active" speaker and one "passive". 2 audio
inputs. Wired remote volume control - wall mounted.
Upgrade connector system to dual gang
Upgrade speaker system to whiteboard speakers
Upgrade usb connectivity solution to Cat5
Advertisement
Table of Contents
