Table of Contents
Advertisement
On Delivery
Handling your 2Touch Board
Always keep your 2Touch board right way up. The cameras are
located at the top corners of the board. Placing the board
upside down may damage or affect the camera settings.
Do not store your 2Touch board horizontally or even on a
significant lean, for more than a few minutes. Doing so can
cause bending of the board under it's own weight, resulting in
deterioration of its performance.
Delivery check list
On receipt of your 2Touch board, please check the following:
Packaging is in good condition, without stains, water marks, tears or
rips.
There is no evidence of the packaging or its contents being transported
or stored lying on it's side.
There is no evidence of the packaging or board being dragged on one
corner or one edge.
There is no evidence of impact damage or of weight having been
applied to the package or board.
On removal of the whiteboard, ensure that the whiteboard surface is
flat. There should be no visible deviation from flatness on the
whiteboard surface.
The accessory items (see below) are supplied.
If you are concerned with any of the above delivery and packaging related
issues, please contact us immediately.
Copyright 2Touch Technologies Limited 2007-2008. All rights reserved.
Advertisement
Table of Contents
