Using Your 2Touch Board As A Mouse; Multi Touch Gestures On The 2Touch Board - 2Touch 2150 series Installation Manual

Using your 2Touch board as a mouse:

Upon connecting any computer to the 2Touch interactive whiteboard, single
touch mouse functionality is enabled instantly (without the need for any
additional software). The standard mouse controls are performed as follows
on the surface of the board:
A touch is a left-
mouse-click

Multi touch gestures on the 2Touch Board:

If using the 2Touch board on a computer with Windows 7, the board surface
can be used with 2Touch gestures to perform the following basic functions in
any compliant Windows environment:
Pinch to scale
Select an object (for
example, a window) with one
finger; with a second finger
then touch and drag towards
or away from the first finger
to make the object smaller or
larger.
Note: to use Windows 7 gestures, the user must have the multi touch driver
installed (available from www.twotouch.com), and must also have gestures
enabled in Windows 7.
Copyright 2Touch Technologies Limited 2007-2008. All rights reserved.
Touch-and-hold is a
right-mouse-click
2 finger rotate
In compliant software
applications: a first touch
and hold determines the
centre of rotation, while
the arc of the second
touch determines the angle
and direction of rotation.
Touch-and-drag
2 finger scroll
Inside of any Window,
dragging down or up with
both fingers
simultaneously will invoke
the down or up scroll. This
is particularly useful on a
whiteboard!