Advertisement
Step 9: Hang TV
To hang the TV onto the Wall Bracket (b) first hook the Monitor Brackets (d,e) over the top of the Wall Bracket, then let the
bottom of the Monitor Brackets rotate in under the bottom of the Wall Bracket as shown in the Detailed View of Diagram 9.
h
b
Detailed View
Diagram 9
Step 10: Add Safety Bolts
Insert the Safety Bolts (s) into the threaded holes in the bottom of the Monitor Brackets (d,e) and tighten them with the Al-
len Key (nn) so that they sit behind the bottom tab on the Wall Bracket (b) as shown in the Detailed View of Diagram 10.
Finally set the tension of the knobs on the Monitor Brackets and you are free to adjust your new flat panel TV. See Diagram
10 below.
Diagram 10
Detailed View
Bottom Tab on the
Wall Bracket
Required Hardware for Step 10
(2) Safety Bolts
Advertisement
