Axminster Trade AT2001DP User Manual page 10

Assembly
Fig 12
8
Fig 13
Fig 14-15
Large Hex bolt
4a
8
4b
Face plate
10
4b
PIllar drill head
WARNING! THE DRILL HEAD IS A
HEAVY AND SUBSTANTIAL PIECE
OF MACHINERY, YOU ARE ADVISED
TO HAVE HELP TO LIFT IT CLEAR
OF THE BOX AND FIT IT TO THE
COLUMN.
CHECK the drill head, ensure that the two hex
socket grub screws that lock the head in place on
the column are withdrawn and will not foul on the
column (5) when the head is fitted (see fig 16). Put
the lower assembly you have just been working on
in the designated position, make sure it is stable
and lift the drillhead (1) over the column (5) and let
it drop into place. Set the drill head approximately
fore and aft and lock in position using the two
caphead grub screws mentioned earlier. Check that
the drillhead is immobile. Everything on the drilling
machine is now secured, see fig 17.
Locate the lever feed handle (7) and it's securing
1
Grub screw
Fig 16