Table of Contents
Advertisement
Setting Up Air/Q
™
Room Placement Considerations
Place Air/Q
in a desired location that cannot be easily accessed by young children
™
or pets. The top of a shelf or cabinet is a good location. An extra-long power cord is
provided to make this easy.
Use the Director Attachment to direct the Air/Q output away from any nearby
surfaces less than 12 inches away.
Do not place Air/Q near an open window if the air is blowing out. Be mindful of air
flow in the area to be scented and position Air/Q so that the natural air currents do
not stop the flow of Air/Q scent into the space. Lighting a match, blowing it out and
then watching the flow direction of the smoke can be helpful in determining this.
Exercise care while changing cartridges when Air/Q is placed on furniture or
surfaces that may be harmed by contact with the liquid fragrance.
Adjusting the Scent Level
Take the time to get the scent level just right. If you followed the Room Size Chart,
you have set Air/Q to the low end of the range for your room size. If after at least
15 minutes the scent is not detectable, move up the setting by 10%. For example,
if your start setting was 20, increase it by 10% to 22. Keep increasing until you and
others can just detect the scent when you enter the space. It is best to leave the
room each time the scent level is adjusted and allow about 15 minutes for your
nose and the scent level to adjust.
Scent Cycles
The Air/Q scent-intensity levels are designed through the use of on and off duty
cycles. A higher scent intensity setting will cause the unit to cycle on for longer
periods of time. A lower scent intensity setting will cause the unit to cycle on for a
shorter period of time. For all settings, there will be a cycle off period.
16
Hide quick links:
Advertisement
Table of Contents
