Control Panel - Vita-Mix PROFESSIONAL 750 Owner's Manual

3
1. On / Off Switch:
The On / Off (or Power) Switch is located on the lower right-hand side of the
machine. The On / Off Switch controls the power to the machine.
BEFORE moving the On / Off Switch to the On (I) position, make sure that
the marker on the Variable Speed Dial is pointed at the Stop Symbol ( ) at
the top of the dial.
After plugging in the unit, move the On / Off Switch to the On position to
ready the machine for blending. Move the On / Off Switch to the Off position
at night and whenever the machine is left unattended.
If the On / Off switch is moved to the Off position to stop a programme mid-
cycle, wait 30 seconds for power to recycle and the timer to reset before
moving the On / Off switch back to the On position.
When the Pulse, Start / Stop, and Programme Symbols brighten, the On / Off
Switch is in the On position and power is flowing.
2. Start ( ) / Stop ( ) Switch:
After the marker on the Variable-Speed Dial is rotated from the Stop Symbol
( ) either to Variable Speed 1 or a Programme setting, press the Start / Stop
Switch to start the machine and initiate the blending process. Pressing the
Start / Stop Switch again will stop the blending process.
Programmes can be interrupted by pushing down the Start / Stop switch
at any time. If reactivated by pushing down the Start / Stop switch, the
programme will start at the beginning.
CON TR OL PA N E L
5
4
2
1
11