Care And Cleaning - Vita-Mix PROFESSIONAL 750 Owner's Manual

C ARE A N D C LE A N IN G
Container
To prepare your new machine for initial use, follow the steps under Normal
Cleaning, below. This will clean the unit and break in the motor.
Normal Cleaning
Before using the Variable-Speed option, always begin with the Variable-Speed
Dial marker pointing to the Stop Symbol ( ) at the top of the dial.
1.
Fill the container half full of warm water and add a few drops of washing-up
liquid to the container.
2.
Snap or push the complete 2-part lid into the locked position.
3.
Perform one of the following procedures:
• Variable Speed:
a. Rotate the Variable-Speed dial to 1.
b.
Press the Start / Stop switch.
c.
Slowly increase variable speed to 10.
d. Run the machine for 30 to 60 seconds.
e. Rotate the Variable-Speed dial to the Stop Symbol ( ) at the top of
the dial.
• Programme
a. Rotate the Variable-Speed dial to the Cleaning ( ) programme
icon. The Cleaning ( ) programme will run for approximately
1 minute.
b. After the programme stops, rotate the Variable-Speed dial to the
Stop Symbol ( ) at the top of the dial.
4. Rinse and drain the container.
To Sanitise:
Before using the Variable-Speed option, always begin with the Variable-Speed
Dial marker pointing to the Stop Symbol ( ) at the top of the dial.
1. Follow the cleaning instructions above.
2.
Fill the container half full of water and add 1 ½ teaspoons of liquid bleach.
22