Vita-Mix PROFESSIONAL 750 Owner's Manual page 20

O P E R AT I N G I N ST R U C T I O N S
8. Take proper care when handling and processing hot ingredients and when
making hot soup and sauces.
9. Due to the machine's speed, processing times are much quicker than with
standard appliances. Until you are accustomed to the machine, time things
carefully to avoid over-processing.
10. After pressing the Start / Stop switch to stop the cycle, wait until the blades
stop completely before removing the lid or container from the motor base.
Dry-Blade Container
Before using this container with programmes or the Variable-Speed option, always
begin with the Variable-Speed Dial pointing to the Stop Symbol ( ) at the top of
the dial.
If purchased, your dry-blade container should be used only for hard, dry materials,
such as grain, and for kneading dough.
1.
Load the container before placing it on the motor base.
2.
Fasten the 2-part lid securely. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid cap opening).
3.
With the motor off, set the dry-blade container on the motor base by aligning
it over the centring pad. Never attempt to put a container onto an operating
motor base or to operate a motor base without a container properly in place.
4. To begin, make sure that the On / Off switch is in the On position.
5.
Use the Variable-Speed dial to select a function.
• Variable Speed - Rotate the dial to the right of centre to Variable Speed 1.
• Programmes - Rotate the dial to the left of centre to the desired
programme.
20
To Avoid Possible Burns, Never
Start on Speeds Above 1 when
Processing Hot Liquids.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid and
lid cap securely in place prior to operating
the machine.
Always start on Variable-Speed 1 and
slowly increase to 10.
CAUTION