Vita-Mix PROFESSIONAL 750 Owner's Manual page 12

3. Pulse Switch ( ):
Variable Speed: Pressing down on the Pulse Switch will cause the machine to
blend at the speed setting shown on the Variable-Speed Dial for as long as
the Pulse Switch is held down.
Programmes: The Pulse function can be used when a programme is selected.
Pushing down the Pulse switch when a programme is selected will cause
the machine to run at 50% of high power for as long as the Pulse switch is
pushed down.
4. Variable-Speed Dial:
The Variable-Speed Dial serves two functions: the use of five programme
settings or ten variable-speed settings.
• To use programmes: rotate the Variable-Speed Dial to the left to the
desired programme.
• To use Variable Speed:
a. Rotate the Variable-Speed dial to the right to 1.
b.
Press down on the Start / Stop switch.
c. Rotate the Variable-Speed dial to the right or left during blending to
increase or decrease the speed of the blades.
d. At the end of the blending cycle, rotate the marker on the
Variable-Speed dial back to the Stop Symbol ( ) at the top of
the dial.
5. Programmes:
Your Professional Series 750 is equipped with five programme settings for
the most commonly used recipes. Rotating the Variable-Speed Dial left of
centre allows you to select a programme for Smoothies, Frozen Desserts,
Soups, Purées and a Cleaning cycle. These programmes are optimised for
these recipe categories, but may also work well with other recipe choices.
12
CO N T R O L PA N E L
CAUTION
To Avoid Possible Burns, Never Start
on Speeds Above 1 when Processing
Hot Liquids.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid and lid
cap securely in place prior to operating the
machine.
Always start on Variable 1, then slowly
increase to 10.