Related Manuals for Vita-Mix Bar Boss Advance
Summary of Contents for Vita-Mix Bar Boss Advance
- Page 1 Vita-Mix Corporation ® Use and Care Manual Read and Save These Instructions ADVANCE PERFORMANCE BEVERAGE BLENDING BARBOSS ® ADVANCE DRINK MACHINE ADVANCE All Models F O O D S E R V I C E...
-
Page 2: Important Safeguards
If you live outside the United States or Canada, contact your local Vita-Mix Distributor, or telephone the Vita-Mix International Division at +1.440.782.2450 or email international@vitamix.com for a distributor in your country. 7. Do not use attachments not recommended or sold by Vita-Mix Corporation. -
Page 3: Important Notes
Important Safeguards CAUTION: The light in the front panel START/STOP switch, when lit, indicates the power to blender is ON and blender could start. Turn power OFF, or unplug the machine before touching movable parts. Shut OFF power switch at night or whenever machine will be left unattended. -
Page 4: Program Dial
® BarBoss Advance & Drink Machine Advance Located on the front of the ON/OFF Switch. machine below the control panel, the ON/OFF switch controls the power to the machine. While plugged in, switch to ON to ready the machine for blending. Shut OFF the power switch at night or whenever the machine will be left unattended. - Page 5 Two-Piece Lid To secure lid plug, rotate it so one tab locks between the notches on top of rubber lid 32 oz. / 0.9 Ltr. Xtreme Performance (XP) Container Lift lid tabs The two-piece lid is easy to clean and easy to put on, to remove lid take off and seal.
- Page 6 BarBoss Advance & Drink Machine Advance ® Instructions The following is the basic XP setting of the six PRE-SET programs for the BarBoss Advance and Drink Machine Advance machines. These programs, numbered 1 through 6, are blending cycles designed for the most commonly made drinks. Depending on the viscosity of the drink you are creating, selecting one of the six PRE-SET programs will run the machine for a full cycle.
-
Page 7: Maintenance Tips
4a. If mixture stops circulating, you have likely trapped an air bubble. Either insert the accelerator tool (sold separately, see page 12) through the lid while blending, or stop the motor, remove the container from the base and stir or scrape the mixture from the sides of container into the center using a rubber spatula to press any air bubbles away from the blades. - Page 8 WARNINGS! Never use a blade assembly with loose, damaged or nicked components. Caution: Do not remove blades unless absolutely necessary! Never attempt to take the blade assembly itself apart. This will void the warranty. The blade assembly includes Blade Agitator Assembly. a precision-hardened stainless steel blade with enclosed steel ball bearings for maximum durability.
- Page 9 The BarBoss ® Advance and Drink Machine Advance are pre-programmed with an XP program which is optimized for the Xtreme Performance (XP) container. The programs can be customized by using a programming chip or programmer software kit available from Vita-Mix. Call your distributor or Customer Service for more information. Although your machine comes from the factory pre-set with the XP programs, follow these instructions when using a custom programming chip.
-
Page 10: Cleaning Products
Care Note To ensure that you get the longest possible life from your Vita-Mix machine, we recommend the following products, when used as directed by the supplier: ......CLEANING PRODUCTS SUPPLIERS IN USA Solid Supra, Solid Power, . - Page 11 Motor Base/Control Panel Unplug the power cord. 2. Gently wash the outside surface with a damp soft cotton cloth moistened with a mild solution of warm water and nonabrasive detergent or nonabrasive liquid spray cleaner. NEVER IMMERSE MOTOR BASE IN WATER OR OTHER LIQUID. 3.
- Page 12 ® BarBoss Advance & Drink Machine Advance Item # Part 1159 Lid plug for 32 oz. / 0.9 Ltr. XP container 15575 Lid only (no plug) for 32 oz. / 0.9 Ltr. XP container 15574 Lid assembly for 32 oz. / 0.9 Ltr. XP container 15570 32 oz.
- Page 13 If you cannot fix your machine with these suggestions, technical help is available by calling If outside the United States and 800-4DRINK4 (800-437-4654) or 440-235-0214. Canada, contact your local Vita-Mix Distributor or telephone the Vita-Mix International Division at +1.440.782.2450 or email international@vitamix.com for a distributor in your country.
-
Page 14: Limited Warranty
Outside the United States and Canada, other warranties may apply. your local Vita-Mix Distributor for details or telephone the Vita-Mix International Division at 1.440.782.2450 or email international@vitamix.com. In case of shipping damage, notify the shipper or carrier immediately. Outside the United... - Page 15 The Service Contract outlined in the following paragraphs applies only to PLEASE NOTE: customers in the United States and Canada. Customers in all other countries should contact their local Vita-Mix ® Distributor for service details. This Vita-Mix machine includes a 1-Year Service Contract effective from date of purchase.
-
Page 16: Power Requirements
Volts: 120 VAC EMC (Taiwan) When applicable: Amps: 11.5 ® Hz: 50/60 To see the complete line of Vita-Mix products, visit www.vitamix.com/foodservice ® VITA-MIX CORPORATION Foodservice Division 8615 Usher Road, Cleveland, Ohio 44138-2103 USA ©2005 Vita-Mix Corporation. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage and retrieval system without the written permission of the Vita-Mix Corporation.