Operating Instructions - Vita-Mix PROFESSIONAL 750 Owner's Manual

O PE R ATI NG IN STR UC T I O NS
Wet-Blade Container
The Wet Blade Container is designed for processing liquids, including juice, frozen
mixtures, sauces, soups, purées, batters and for wet chopping.
Before using this container with programmes or the Variable-Speed option,
always begin with the Variable-Speed Dial pointing to the Stop Symbol ( ) at
the top of the dial.
1. Move the On / Off switch to the On position.
2.
Load the container before placing it on the motor base. Place liquids and soft
foods in the container first, then solid items and, finally, ice. Although not
necessary for blending, you may want to cut or break food into smaller pieces
for more precise measurement of ingredients.
3. Fasten the 2-part lid securely. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid cap opening). Make
sure that the lid is securely latched, especially when blending hot ingredients.
4.
With the motor off, set the wet-blade container on the motor base by aligning
it over the centring pad. Never attempt to put a container onto an operating
motor base or to operate a motor base without a container properly in place.
5.
Use the Variable-Speed dial to select a function.
• Variable Speed - Rotate the dial to the right of centre to Variable Speed 1.
• Programmes - Rotate the dial to the left of centre to the desired programme.
6.
Activate the blades by pressing the Start / Stop Switch. Your container may
shift as it is aligned.
• Variable Speed - slowly rotate the Variable-Speed Dial to the right to the
desired speed.
• Programmes - The programme blending speeds and duration vary and
will stop automatically at the end of the programme. Programmes can
be interrupted by pushing down the Start / Stop switch at any time. If
reactivated by pushing down the Start / Stop switch, the programme will
start at the beginning.
7.
If the mixture stops circulating, you may have trapped an air bubble. To
resolve, insert the tamper through the lid cap and stir until it "burps". If
this does not work, press the On / Off switch to stop the motor. Remove
the container from the motor base and use a rubber spatula to press the
air bubble away from the blades. Return the container to the motor base,
replace the lid and continue blending.
19