Vita-Mix PROFESSIONAL 750 Owner's Manual page 9

PA RTS A N D F E AT U R E S
On / Off Switch: The On / Off (or Power) Switch is on the right-hand side of the
machine base. The On / Off Switch controls the power to the machine.
Start / Stop Switch: Pressing down on the Start / Stop Switch will initiate the
blending process. Pressing down on the Start / Stop Switch again will stop the
blending process.
Variable-Speed Dial: The centre Variable-Speed Dial serves two functions:the use
of three programmes or the use of ten variable-speed settings.
Pulse Switch ( ): The Pulse Switch can be used when using Variable Speeds or
Programmes.
Container: Millilitres, ounces and cups are clearly marked.
2-Part Lid: The 2-part Lid is easy to put on and take off and easy to clean. Always
use the lid and the lid plug when the machine is in operation.
CAUTION:
container styles, types and sizes.
Snap the lid onto the container and leave in place for a few minutes. Once the lid
has been left on the container, it will be much easier to lock or remove.
Lid Cap: Insert through the lid and secure by turning clockwise. Remove the lid
cap to use the tamper or to add ingredients.
Tamper: The tamper allows you to accelerate the process of very thick and / or
frozen mixtures that cannot be processed in a standard blender. Using the Tamper
maintains circulation by preventing air pockets from forming.
Rotating Blades Can
Cause Severe Injury.
DO NOT reach into the container while
the machine is running.
Lids and tampers are not interchangeable between different
WARNING
9