Service And Transport - Bush AG56TW Operating And Installation Instruction

Service and transport

Basic troubleshooting before contacting service
If the oven does not operate :
The oven may be plugged off, there has been a black
out.
If the oven does not heat :
The heat may be not adjusted with oven's heater
control switch.
If the interior lighting lamp does not light :
The electricity must be controlled. It must be
controlled whether the lamps are defective. If they are
defective, you can change them as following the
guide.
Cooking (If lower-upper part does not cook equally):
Check the shelf locations, cooking period and heat
values according to the manual.
The hob burners do not operate correctly :
Check if the burner parts are correctly
assembled(especially after cleaning).
The gas supply pressure may be too low/high. For
appliances working with bottled LPG, the LPG
cylinder may be depleted.
Except these, if you still have any problem with your
product, please call to the Authorized Service.
Information related to transport
If you need any transport; keep the original case of
product and carry it with its original case when
needed to be carried. Follow the transport signs on
case. Tape the cooker on upper parts, caps and
crowns and pan supports to the cooking panels.
Place a paper between the upper cover and cooking
panel, cover the upper cover, then tape it to the side
surfaces of oven. Tape cardboard or paper onto the
front cover on interior glass of oven as it will be
suitable to the traysi, for the wire grill and trays in your
oven not to damage to the oven's cover during
transport. Also tape the oven'scovers to the side
walls.
If it does not have the original case; prepeare a
carriage box so that the appliance, especially
external surfaces (glass and painted surfaces) of oven
is protected against external forces.
17