Bush AG56TW Operating And Installation Instruction page 10

Installation of your oven
Fixing the stability chain
To prevent any tilting of the applance, and safe usage
of the appliance, a stability chain should be used.
To fix the chain, unscrew the screw shown in the
figure below. Then, align the fist loop of the chain with
the hole and assemble with the screw so that the
chain stands in its place safely. Check the assembly
by gently pulling the chain from the other end of the
chain. Fix the other end of the chain to the rear wall
as appropriate for your kitchen.
The chain is not supplied within the package of the
appliance, but can be supplied from the market.
1/2" BSP Female
Figure 8
Figure 9
Electric connection and security
The earthing cable must be connected to the earth
terminal .
You have to ensure the power cord with suitable
insulation to be connected to the power source
during the connection If there is no appropriate .
earthed electric outlet in accordance with regulations
in the place where the appliance will be installed,
immediately contact to our authorized service. The
earthed electric outlet must be close to the appliance.
Do not use an extension cord
The power cord must not touch to the hot surface of
the product.
In case the cord is damaged, contact Authorized
Service to have it changed
Any wrong electric connection may damage your
appliance, as well as endangering your safety,
rendering your guarantee invalid
The appliance is adjusted for 230V 50Hz electricity. If
the network electricity is different than this value,
immediately contact your authorized service
The supply cord should be kept away from hot parts
of appliance. Otherwise the cord may be damaged,
causing short circuit.
The producer firm declares that it has no
responsibility against any kind of damages and losses
that are caused by improper connections that are
performed by unauthorized people
L
.
.
.
.
.
N
Figure 10
9