Advertisement
Installation of your oven
General warnings and measures
Your appliance is produced in accordance with the
local and international standards and regulations
applicable.
The maintenance and repair works must be made
only by authorized service technicians. The installation
and repair works without following proper knowledge
may endanger you
.
While your appliance operates, its outside surfaces
heat up. The interior surfaces of oven, and the flue
outlets are quite hot. Even if the appliance is turned
off, these parts keep its heat for a specific time. Do
not touch onto hot surfaces, and keep children away
Do not leave the cooker while cooking with solid or
liquid oils. They may catch fire on condition of
extreme heating. Never pour water to the flames that
are caused by oil. Cover the saucepan or frypan with
its cover in order to choke the flame that has occured
in this case and turn the cooker off
The oven and heat adjustment switches must be
adjusted for cooking in your oven. Otherwise the oven
does not operate.
When the door or drawer of oven is open do not
leave anything on it . You may unbalance your
appliance or break the cover
Do not put heavy things or flammable or ignitable
goods (nylon, plastic bag,paper,cloth...etc) into the
lower drawer. This includes cookware with plastic
accessories (e.g. handles).
Plug the appliance off the electrical network when you
do not use the appliance and keep the gas valve off.
Protect your appliance against atmospheric effects.
Do not leave it to effects such as sun, rain, snow,
powder etc.
Remember that this appliance is designed for indoor
use.
10
.
.
Gas conversions
Caution : The following procedures must be
undertaken by authorized service personnel.
Your appliance is adjusted to be operated with LPG
gas. The gas burners can be adapted to different
types of gas, by replacing the corresponding injectors
and adjusting minimum flame length suitable to the
gas in use. For this purpose, following steps should
be performed
:
Changing injectors:
.
Hob Burners
:
Cut off the feeding gas flow and electric current
Remove the hob cap and the adapter.
Unscrew the injectors. For this, use a 7mm spanner.
Replace the injector with the ones from the spare set,
with corresponding diameters suitable to the type of
gas that is going to be used, according to the
information chart (which is also supplied in the spare
set).
Oven/Grill Injectors
The oven and grill injectors are assembled by a single
screw that is placed on the tip of the burner. For grill
burners, this screw is already visible. Remove the
screw, pull the grill burner to yourself and you will see
the injector revealed on the rear surface of the oven
cavity.
For oven burners, open the drawer compartment and
you will see the assembly screw below the burner.
Remove the screw, move the burner diagonally and the
injector will be revealed on the rear side of the burner
box.
Remove the injectors with a 7mm spanner and
replace the injector with the ones from the spare set,
with corresponding diameters suitable to the type of
gas that is going to be used, according to the
information chart (which is also supplied in the spare
set).
:
.
Hide quick links:
Advertisement
