User Preferences Parameter Defaults - Motorola Symbol DS6608 Product Reference Manual

4-4 Symbol DS6608 Product Reference Guide

User Preferences Parameter Defaults

Table 4-1 lists defaults for user preferences parameters. To change any option, scan the appropriate bar code(s) provided in the User
Preferences section beginning on page 4-5.
See Appendix A, Standard Default Parameters
miscellaneous default parameters.
Note
User Preferences
Set Default Parameter
Parameter Scanning
Beeper Tone
Beeper Volume
Power Mode
Time Delay to Low Power Mode
Trigger Mode
Picklist Mode
Decode Session Timeout
Timeout Between Decodes, Same Symbol
Beep After Good Decode
for all user preferences, hosts, symbologies, and
Table 4-1. User Preferences Default Table
Parameter
Parameter
Number Default
All Defaults
ECh Enable
91h Medium
8Ch High
80h Continuous On
92h 1 Minute
8Ah Auto Aim
F0h 92h Disabled Always
88h 9.9 sec
89h 0.6 sec
38h Enable
Page
Number
4-5
4-5
4-6
4-7
4-7
4-8
4-9
4-10
4-11
4-11
4-12