Scanner Emulation Parameter Defaults - Motorola Symbol DS6608 Product Reference Manual

11-4 Symbol DS6608 Product Reference Guide
3. Scan the Scanner Emulation Host bar code from
interface.
4. To modify any other parameter options, scan the appropriate bar codes in this chapter.
Connect the digital scanner to 5 volt decoders only. Connecting the digital scanner to a 12 volt
decoder can damage the digital scanner and invalidate the warranty.
WARNING

Scanner Emulation Parameter Defaults

Table 11-1 lists the defaults for the Scanner Emulation host. To change any option, scan the appropriate bar code(s) provided in the
Scanner Emulation Host Parameters section beginning on page 11-5.
See Appendix A, Standard Default Parameters
miscellaneous default parameters.
Note
Beep Style
Parameter Pass-Through
Convert Newer Code Types
Module Width
Convert All Bar Codes to Code 39
Code 39 Full ASCII Conversion
Transmission Timeout
Ignore Unknown Characters
Leading Margin
Check for Decode LED
Scanner Emulation Host on page 11-5
for all user preferences, hosts, symbologies, and
Table 11-1. Scanner Emulation Default Table
Parameter
to enable the Scanner Emulation host
Default
Beep on Successful Transmit 11-5
Parameter Process and Pass 11-6
Through
Convert Newer Code Types 11-7
µs
20 11-8
Do Not Convert to Bar Codes 11-8
to Code 39
Disable 11-9
3 seconds 11-9
Ignore Unknown Characters 11-11
2 ms 11-12
Check for Decode LED 11-13
Page Number