Install The Alcatel-Lucent My Ic Phone Bluetooth® Wireless Handset - Alcatel-Lucent OmniTouch 8082 User Manual

After pairing the Bluetooth accessory, you must define the accessory type in the audio settings.
Select the application
Settings
Device
Audio
Accessory type
BT
Ok
Select the type of accessory that you have just added :
Bluetooth accessory
• headset
• handsfree
• loudspeaker
Ok
All devices other than the Alcatel-Lucent My IC Phone Bluetooth® Wireless Handset will be treated
as headset device.
Install the Alcatel-Lucent My IC Phone Bluetooth® Wireless handset
8.15
Select the application
Settings
Device
Bluetooth
Add
Scan
The set scans for available Bluetooth devices...
Your Bluetooth® device needs to be prepared for pairing. Take the handset off the hook and switch
it off, then press and hold both handset buttons at the same time. You will hear a 3-note tone and
the LED will flash green and orange.
Searching for Bluetooth® equipment. Wait for the detected equipment type and address to be
displayed
Select the relevant equipment
Add
Enter the device PIN code (The default PIN code is 0000)
Ok
The 3-note tone indicates that the handset has been installed correctly (the LED flashes green or
orange depending on the battery charge level)
42