Download Print this page

Service And Customer Care - Kenwood CM020 series Instructions

Hide thumbs

Advertisement

This appliance conforms to EC
5 Close the lid and put the carafe
directive 2004/108/EC on
on the hotplate. NOTE: The lid
Electromagnetic Compatibility and
must be fitted to the carafe
EC regulation no. 1935/2004 of
in order to operate the anti-
27/10/2004 on materials intended
drip valve.
for contact with food.
6 Plug in and switch on.
7 Don't remove the carafe until
before using for the first
brewing has finished. When the
time
carafe is empty, switch off and
1 Wash the parts: see 'care and
unplug the appliance.
cleaning'.
The hot plate will keep your coffee
2 Run two full tanks of water
hot, but the sooner you drink it,
(without coffee) through the coffee
the better it will taste.
maker to clean it out. See 'to
If you have not used the
make coffee'.
appliance for a while, run one full
key
tank of water (without coffee)
through to clean it out.
cup warming tray
care & cleaning
lid handle
paper filters
Always switch off, unplug and
permanent filter (if supplied)
allow to cool before cleaning.
filter holder
Don't wash parts in the
anti-drip valve
dishwasher.
water tank (750 mls)
on/off button with indicator
carafe and lid, filter holder
hotplate
and permanent filter holder
carafe
Wash, then dry.
measuring spoon
body
Wipe with a damp cloth, then dry.
to make coffee
Don't use abrasives - they'll
1 Lift the lid using the handle
at
scratch the plastic and metal
the front of the coffee maker.
surfaces.
2 Fill the tank with the desired
amount of water. The water level
to descale
must be between the 2 and 6 cup
1 Buy a suitable descaler.
marks. Do not fill above the MAX
2 Descale the machine.
level.
3 After descaling, run at least two full
Use cold water. We recommend
tanks of water (without coffee)
using filtered water as it reduces
through the coffee maker to clean
limescale and prolongs the life of
it out.
your coffee maker. Never use
4 Wash the parts.
warm or fizzy water.
3 Ensure the filter holder is
positioned correctly.
4 Fit either the permanent filter
supplied or a paper filter into the
filter holder. Add the coffee using
the spoon supplied (approximately
1 level spoon (7g) per cup to
taste).
service and customer
care
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised
IMPORTANT INFORMATION FOR
Kenwood repairer.
CORRECT DISPOSAL OF THE
UK
PRODUCT IN ACCORDANCE
If you need help with:
WITH EC DIRECTIVE
using your appliance or
2002/96/EC.
servicing, spare parts or repairs (in
At the end of its working life, the
or out of guarantee)
product must not be disposed of as
call Kenwood customer care on
urban waste.
023 92392333. Have your
It must be taken to a special local
model number ready - it's on
authority differentiated waste collection
the underside of the coffee maker.
centre or to a dealer providing this
service.
For spare parts call
Disposing of a household appliance
0870 241 3653.
separately avoids possible negative
other countries
consequences for the environment
Contact the shop where you
and health deriving from inappropriate
bought your appliance.
disposal and enables the constituent
guarantee
materials to be recovered to obtain
If your coffee maker goes wrong
significant savings in energy and
within one year from the date you
resources. As a reminder of the need
bought it, we will repair it (or
to dispose of household appliances
replace it if necessary) free of
separately, the product is marked with
charge provided:
a crossed-out wheeled dustbin.
you have not misused, neglected or
damaged it;
it has not been modified (unless by
Kenwood);
it is not second-hand;
it has not been used commercially;
you have not fitted a plug
incorrectly; and
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
19118/1
CM020 series

Advertisement

loading

  Also See for Kenwood CM020 series