Download Print this page

Service And Customer Care - Kenwood CM03 Instructions Manual

Cm030 series
Hide thumbs

Advertisement

Table of Contents
to make coffee
1 Lift the lid using the handle
the front of the coffee maker.
2 Fill the tank with the desired amount
of water. The water level must be
between the 2 and 6 cup marks.
Do not fill above the MAX level.
Use cold water. We recommend
G
using filtered water as it reduces
limescale and prolongs the life of
your coffee maker. Never use warm
or fizzy water.
3 Ensure the filter holder is positioned
correctly.
4 Fit either the permanent filter
supplied or a paper filter into the
filter holder. Add the coffee using
the spoon supplied (approximately
1 level spoon (7g) per cup to taste).
5 Close the lid and put the carafe on
the hotplate. NOTE: The lid
must be fitted to the carafe
in order to operate the anti-
drip valve.
6 Plug in and switch on.
7 Don't remove the carafe until
brewing has finished. When the
carafe is empty, switch off and
unplug the appliance.
Your coffee maker will keep the
G
coffee warm and then switch off
after approximately 40 minutes. The
indicator light will go out when the
keep warm stops. If you want to
continue keeping the coffee warm
then switch the coffee maker off for
approximately 2 seconds then
switch back on, the coffee will then
keep warm for another 40 minutes.
The hot plate will keep your coffee
G
hot, but the sooner you drink it, the
better it will taste.
If you have not used the appliance
G
for a while, run one full tank of
water (without coffee) through to
clean it out.
care & cleaning
at
Always switch off, unplug and allow
G
to cool before cleaning.
Don't wash parts in the dishwasher.
G
carafe and lid, filter holder
and permanent filter holder
Wash, then dry.
G
body
Wipe with a damp cloth, then dry.
G
Don't use abrasives - they'll scratch
the plastic and metal surfaces.
to descale
1 Buy a suitable descaler.
2 Descale the machine.
3 After descaling, run at least two full
tanks of water (without coffee)
through the coffee maker to clean it
out.
4 Wash the parts.
service and customer
care
If the cord is damaged it must, for
G
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
using your appliance or
G
servicing or repairs
G
Contact the shop where you bought
G
your appliance.
Designed and engineered by
G
Kenwood in the UK.
Made in China.
G
5

Hide quick links:

Advertisement

Table of Contents
loading