4 Fit either the permanent filter
supplied or a paper filter into the
filter holder. Add the coffee using
the spoon supplied (approximately
1 level spoon (7g) per cup to taste).
5 Close the lid and put the carafe on
the hotplate. NOTE: The lid
must be fitted to the carafe
and closed in order to
operate the anti-drip valve.
6 Plug in and switch on.
7 Don't remove the carafe until
brewing has finished. When the
carafe is empty, switch off and
unplug the appliance.
The hot plate will keep your coffee
hot, but the sooner you drink it, the
better it will taste.
If you have not used the appliance
for a while, run one full tank of
water (without coffee) through to
clean it out.
care & cleaning
Always switch off, unplug and allow
to cool before cleaning.
Don't wash parts in the dishwasher.
carafe and lid, filter holder
and permanent filter holder
Wash, then dry.
Wipe with a damp cloth, then dry.
Don't use abrasives - they'll scratch
the plastic and metal surfaces.
1 Buy a suitable descaler.
2 Descale the machine.
3 After descaling, run at least two full
tanks of water (without coffee)
through the coffee maker to clean it
4 Wash the parts.
service and customer
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
If you need help with:
using your appliance or
servicing or repairs
Contact the shop where you bought
Designed and engineered by
Kenwood in the UK.
Made in China.
IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE
At the end of its working life, the product
must not be disposed of as urban
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
Disposing of a household appliance
separately avoids possible negative
consequences for the environment and
health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need to
dispose of household appliances
separately, the product is marked with
a crossed-out wheeled dustbin.