Teknique FWD Owner's Manual page 56

3. To unlock the controller, press the on/off button. The speed display will cycle.
Insert and
illuminate indicating the controller is unlocked and the chair can be operated.
Lock Sequence System
1. Turn the controller on.
2. To lock, depress and hold the on/off button. After one second the controller
will beep. Release the on/off button. Move and hold the joystick forward until
the controller beeps. Move and hold the joystick in reverse until the controller
beeps. Release the joystick. There will be a long beep that indicates the
controller is locked.
3. To unlock, turn the control system on. The speed/response indicator will be
rippling up and down. Move and hold the joystick forward until the controller
beeps. Then move and hold the joystick in reverse until the controller beeps.
Release the joystick. There will be a long beep that indicates the controller is
unlocked.
56 Chapter 11
the key (See Figure 11E and 11F, Page 55). The displays will
REMOVE
ON/OFF Button
Joystick
Figure 11H - VSI or VR2
D82007778 REV O 6/10/14