Teknique FWD Owner's Manual page 35

Seatback Adjustment for 22" and 24" Reclining Back Seat - The 22 and 24
inch seats have a heavy duty, dual hinge mechanism that allows you to adjust the
seatback from the right or left side. The seatback release has two modes - one to
recline or raise the seatback and one to release the seatback to allow it to fold
forward for storage or transport.
Adjusting The Recline - To recline the seat from the straight up position (see
Figure 4L below), locate the release lever on the lower right or left rear of the seat.
Pull up on the lever to lock the seatback in position (see Figure 4M below).
If you wish to raise the seatback pull up on the lever and move the seatback to the
desired position. The seatback will stop when it is straight up.
Folding The Seatback Down - Starting in the straight-up position, push the lever
down and fold the seat forward (see Figure 4N below).
To raise the seatback from the folded position, lift the seatback until it locks.
Fold Down
Figure 4L - Straight Up
D82007778 REV O 6/10/14
The seat can be reclined or folded from the upright back position
only.
Make sure the release lever is locked in position before applying
weight to back or arms.
Recline
Figure 4N - Fold Down
Figure 4M - Recline
Chapter 4 35