Seat Back Angle Adjustment - Teknique FWD Owner's Manual

Seat Back Angle Adjustment

The seat back has fixed positions to select from (Figure 4I). To change the back angle
position:
1. Locate the screw and nut on the left hinge and right hinge.
2. Remove the screw and nut and place the back in the desired angle position.
Make sure the holes in the outer hinge and inner hinge brackets line up for
the desired angle.
3. Re-install the screws and nuts into the new location and tighten securely.
The seat back will fold forward when pushed from the rear or
pulled from the front. Always use caution when pushing the
chair from the back. If the chair must be pushed from the back,
push or pull on the arms or another solid surface.
32 Chapter 4
Figure 4I
D82007778 REV O 6/10/14