Footrests And Legrests; Flip-Up Style Footrest (Fwd, Xhd, Hd-6 Models Only) - Teknique FWD Owner's Manual

Chapter 6

Footrests and Legrests

When your thighs rest on the seat cushion, your feet should comfortably rest on
the plate(s) of the footrest/legrests. You can make several adjustments to maximize
safety and comfort. In addition, a bracket mounted to the underside front of the
seat accommodates swing-away legrests.
Flip-Up Style Footrest (FWD, XHD and HD-6
models only)
1. You can adjust the flip-up style footrest angle from 0 to 15 degrees. To adjust,
locate the set screws in each corner of the frame bracket and move them in or
out until you have found a comfortable foot position. Adjust screws using the
supplied 1/4" hex wrench. To prevent binding, make sure the heads of the
screws touch the footrest at the same time (See Figure 6A below).
2. Set footrest tension by tightening or loosening the right hand pivot bolt with
the nylon washer.
3. Change the footplate height by using the upper or lower mounting holes on
the sides of the anti-tip brackets.
38 Chapter 6
Figure 6A - Footrest Adjustment Screws
D82007778 REV O 6/10/14