Arm Angle Adjustment; Controller Position Adjustment - Teknique FWD Owner's Manual

Arm Angle Adjustments
The seat arms have angle adjustments to suit your driving and comfort requirements.
To adjust the arm angle on the seat arms, lift the arm and locate the adjustment
bolt near the pivot point. Refer to Figure 4D below.
Use the supplied 1/4 inch hex wrench to make the adjustment. Turn the screw
clockwise to lower the arm and counter clockwise to raise the arm.
Figure 4D

Controller Position Adjustment

You can adjust the position of the controller by lifting the arm and loosening the
socket head cap screw closest to the controller.
Slide the controller bracket to a comfortable position and secure the screw. Make
sure the screw is clear of the removal key opening (see Figure 9A, page 46) in the
bracket before tightening.
3" Max
T-Wrench
Figure 4E
30 Chapter 4 D82007778 REV O 6/10/14