Troubleshooting Guide - Kenwood kMix FPX930 series Instruction Manual

IMPORT NT INFORM TION FOR CORRECT DISPOS L
OF THE PRODUCT IN
DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as
urban waste.
It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving
from inappropriate disposal and enables the constituent materials to
be recovered to obtain significant savings in energy and resources.
As a reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled
dustbin.

troubleshooting guide

Problem
The processor will not operate
Mini chopper/mill will not
operate
Processor stops during
processing
Mini chopper/mill leaking from
blade assembly base.
Poor performance of
tools/attachments.
CCORD NCE WITH EC
Cause
No power/indicator light not lit.
Bowl not fitted to power unit correctly.
Bowl lid not locked on correctly.
Mini chopper/mill not locked on correctly.
Mini chopper/mill not assembled correctly.
Processor overloaded/maximum capacities
exceeded.
Lid unlocked.
Seal missing
Seal incorrectly fitted
Seal damaged.
Refer to hints in relevant "using the attachment" section. Check attachments are assembled correctly.
guarantee UK only
If your food processor goes wrong within one year from the date
you bought it, we will repair it (or replace it if necessary) free of
charge provided:
l
you have not misused, neglected, or damaged it;
l
it has not been modified (unless by Kenwood);
l
it is not second hand;
l
it has not been used commercially;
l
you have not fitted a plug incorrectly; and
l
you supply your receipt to show when you bought it.
This guarantee does not affect your statutory rights.
Solution
Check processor is plugged in
Check bowl is located correctly and the handle is
situated towards the right hand side.
Check that the lid interlock is located correctly into
the handle area.
The processor will not work if the bowl and
lid are fitted incorrectly.
If none of the above check the fuse/circuit breaker in
your home.
The mini chopper/mill will not operate if fitted
incorrectly to the interlock.
Check blade unit is fully tightened onto the mill jar.
Check maximum capacities stated in the
recommended speed chart.
Check lid is locked correctly.
Check seal is fitted correctly and not
damaged. To obtain a replacement
seal see "service & customer care"
7