Processor; Choosing A Speed For All Functions; To Use Your Food Processor; Additional Attachments - Kenwood kMix FPX930 series Instruction Manual

key

processor

power unit
detachable drive shaft
bowl
lid
feed tube
pushers
safety interlocks
cord storage (at back)
speed/pulse control
power on light

choosing a speed for all functions

tool/ ttachment
knife blade
knife blade with maxi-blend canopy
whisk
dough tool
discs – slicing/grating/chipping
mini chopper/mill

to use your food processor

1 Fit the detachable shaft onto the power unit
2 Then fit the bowl. Place the handle towards the back and turn
clockwise until it locks
3 Fit an attachment over the drive shaft.
Always fit the bowl and attachment onto the processor before
adding ingredients.
4 Fit the lid - ensuring the top of the drive shaft locates into the
centre of the lid.
Do not use the lid to operate the processor, always
use the on/off speed control.
5 Plug in and the power on light will come on. Switch on and
select a speed. (Refer to the recommended speed chart).
The processor will not operate if the bowl or lid are
not fitted correctly to the interlock. Check that the
feed tube and bowl handle are situated to the right
hand side.
Use the pulse (P) for short bursts. The pulse will operate for as
long as the control is held in position.
6 Reverse the above procedure to remove the lid, attachments and
bowl.
lways switch off and unplug before removing the
lid.
function
One Stage Cake Mix
Pastry - rubbing fat into flour
Adding water to combine pastry ingredients
Chopping/pureeing/pates
Soups – start at a low speed and move up to Max
Egg Whites
Egg & sugar for fatless sponges
Cream
Yeasted mixes
Firm food items such as carrots, hard cheese.
Softer items such as cucumbers, tomatoes
Herbs
Nuts & Coffee Beans
.
.
mini chopper/mill
blade unit
sealing ring
jar
mill lid

additional attachments

knife blade
dough tool
twin beater geared metal whisk
maxi-blend canopy
thick slicing/coarse grating disc
thin slicing/fine grating disc
fine (Julienne style) chipper disc
KENSTORE™ attachments carousel
speed
1 – 8
5 – 8
1 – 5
8
1 – 8
8
8
5 – 8
8
5 – 8
1 – 5
8
8
important
Your processor is not suitable for crushing or grinding coffee
beans, or converting granulated sugar to caster sugar.
When adding almond essence or flavouring to mixtures avoid
contact with the plastic as this may result in permanent marking.
to use your mini chopper/mill
Use the mini chopper/mill for milling herbs, nuts and coffee
beans.
1 Put your ingredients into the jar.
2 Fit the sealing ring
3 Turn the blade unit upside down. Lower it into the jar, blades
down.
4 Screw the blade unit onto the jar until it is finger tight.
5 Place the mini chopper/mill onto the power unit and turn to
lock .
6 Switch on to maximum speed or use the pulse control.
hints
Herbs are best milled when clean and dry.
4
(if supplied)
maximum capacities
1.5Kg/3lb 5oz Total Wt
340g/12oz Flour Wt
600g/1lb 6oz Meat
1.5 litres/2pts 12oz
6 Egg Whites
500 mls
600g/1lb 6oz
10g
50g
into the blade unit .