To Use Your Liquidiser - Kenwood kMix FPX930 Series Instruction Manual

to use your food processor
1 Fit the detachable shaft onto the power unit
2 Then fit the bowl. Place the handle towards the back and
turn clockwise until it locks
3 Fit an attachment over the drive shaft.
l
Always fit the bowl and attachment onto the processor
before adding ingredients.
4 Fit the lid - ensuring the top of the drive shaft locates into
the centre of the lid.
l
Do not use the lid to operate the processor,
always use the on/off speed control.
5 Plug in and the power on light will come on. Switch on and
select a speed. (Refer to the recommended speed chart).
l
The processor will not operate if the bowl or lid
are not fitted correctly to the interlock. Check
that the feed tube and bowl handle are situated
to the right hand side.
l
Use the pulse (P) for short bursts. The pulse will operate for
as long as the control is held in position.
6 Reverse the above procedure to remove the lid, attachments
and bowl.
l
lways switch off and unplug before removing the
lid.
important
l
Your processor is not suitable for crushing or grinding coffee
beans, or converting granulated sugar to caster sugar.
l
When adding almond essence or flavouring to mixtures
avoid contact with the plastic as this may result in
permanent marking.

to use your liquidiser

1 Fit the sealing ring into the blade unit
seal is located correctly. Leaking will occur if the seal
is damaged or incorrectly fitted.
2 Screw the goblet onto the blade assembly.
3 Put your ingredients into the goblet.
4 Fit the lid to the goblet and push down to secure
filler cap.
5 Place the liquidiser onto the power unit and turn to lock
l
The appliance will not operate if the liquidiser is
incorrectly fitted to the interlock.
6 Select a speed (refer to the recommended speed chart) or
use the pulse control.
l
Liquids should be allowed to cool to room
temperature before blending.
hints
l
When making mayonnaise, put all the ingredients, except
the oil, into the liquidiser. Remove the filler cap. Then, with
the appliance running, add the oil slowly through the hole in
the lid.
l
Thick mixtures, eg pates and dips, may need scraping
down. If it's difficult to process, add more liquid.
l
Ice crushing - operate the pulse in short bursts until crushed to
the desired consistency.
l
To ensure the long life of your liquidiser, never run it for longer
than 60 seconds. Switch off as soon as you've got the right
consistency.
l
The processing of spices is not recommended as they may
damage the plastic parts.
l
The appliance will not work if the liquidiser is incorrectly fitted.
.
.
- ensuring the
. Fit the
l
To blend dry ingredients - cut into pieces, remove the filler
cap, then with the appliance running, drop the pieces down
one by one. Keep your hand over the opening. For best
results empty regularly.
l
Don't use the liquidiser as a storage container. Keep it
empty before and after use.
l
Never blend more than 1
milkshakes.
to use your mini chopper/mill
Use the mini chopper/mill for milling herbs, nuts and coffee
beans.
1 Put your ingredients into the jar
2 Fit the sealing ring
3 Turn the blade unit upside down. Lower it into the jar, blades
down.
4 Screw the blade unit onto the jar until it is finger tight.
5 Place the mini chopper/mill onto the power unit and turn to
lock .
6 Switch on to maximum speed or use the pulse control.
hints
Herbs are best milled when clean and dry.
.
5
1 ⁄ litres - less for frothy liquids like
2
.
into the blade unit .