Lenovo ThinkCentre 3026 Maintenance Instructions Manual page 71

Diagnostic Error Code
018-199-XXX
PCI Card test failed, cause unknown
018-250-XXX
PCI Card Services error
020-000-XXX
PCI Interface Test Passed
020-0XX-XXX
PCI Interface error
020-195-XXX
PCI Test aborted by user
020-196-XXX
PCI test halt, error threshold exceeded
020-197-XXX
PCI test warning
020-198-XXX
PCI test aborted
020-199-XXX
PCI test failed, cause unknown
020-262-XXX
PCI system error
025-000-XXX
IDE interface Test Passed
FRU/Action
1. Go to "Undetermined problems" on page
78.
2. Flash the system and re-test. See
"Updating (flashing) BIOS from a disc"
on page 326.
3. Replace component under function test.
1. PCI card
2. Riser card, if installed
3. System board
No action
1. PCI card
2. Riser card, if installed
3. System board
Information only
Restart the test, if necessary.
1. Press F3 to review the log file.
2. Restart the test to reset the log file.
1. Make sure the component that is called
out is connected and/or enabled. See .
2. Re-run the test.
3. Replace the component that is called out
in warning statement.
4. Replace the component under test.
1. If a component is called out, make sure it
is connected and/or enabled. See .
2. Flash the system and re-test. See
"Updating (flashing) BIOS from a disc"
on page 326.
3. Go to "Undetermined problems" on page
78.
1. Go to "Undetermined problems" on page
78.
2. Flash the system and re-test. See
"Updating (flashing) BIOS from a disc"
on page 326.
3. Replace component under function test.
1. PCI card
2. Riser card, if installed
3. System board
No action
Chapter 7. Symptom-to-FRU index
65