Viewing The Test Log - Lenovo ThinkCentre 3026 Maintenance Instructions Manual

To select the Quick Erase Hard Drive or Full Erase Hard Drive utility, do the
following:
1. Select the UTILITY option on the toolbar and press Enter.
2. Select either the QUICK ERASE or FULL ERASE HARD DISK option and
follow the instructions on the screen.

Viewing the test log

Errors reported by the diagnostic test will be displayed by the program as a failed
test.
To view details of a failure or to view a list of test results, use the following
procedure from any test category screen:
1. Press F3 to activate the log file.
2. Press F3 again to save the file to diskette or press F2 to print the file.
49
Chapter 5. Diagnostics