1. Make sure that all components have been reassembled correctly and that no
2. If you have removed the front bezel, reinstall it. To reinstall the front bezel,
3. Make sure that the cables are routed correctly. Keep cables clear of the hinges
4. Lower the optical drive bay assembly.
5. Close the computer cover.
6. Reconnect the external cables and power cords to the computer. See "Locating
Chapter 9. Replacing FRUs (Machine types: 3026, 3039, 3137, 3149, 3245, 3269, 3319, 3394, 3491, 3627, 3699, 3878, 4972, 5132, 5261,
tools or loose screws are left inside your computer. See "Locating components"
on page 121 for the locations of various components in your computer.
align the three tabs on the front bezel with the corresponding holes in the
chassis and pivot the front bezel inwards until it snaps into position.
and sides of the computer chassis to avoid interference with closing the
computer cover.
connectors on the rear of the computer" on page 119.
5297, 5391, 5472, 5485, 5536, 5548, 5567, 5864, and 6213.)
149