9. Insert the two tabs 2 on the bottom of the new internal speaker into the
Figure 66. Installing the new internal speaker
10. Reconnect the internal speaker cable and the thermal sensor cable to the
11. To reinstall the front bezel, align the three tabs on the front bezel with the
12. Go to "Completing the parts replacement" on page 148.
Chapter 9. Replacing FRUs (Machine types: 3026, 3039, 3137, 3149, 3245, 3269, 3319, 3394, 3491, 3627, 3699, 3878, 4972, 5132, 5261,
corresponding holes in the chassis, and push the speaker straight down until
the other two tabs 1 snap into position.
system board. See "Locating parts on the system board" on page 122.
corresponding holes in the chassis and pivot the front bezel inwards until it
snaps into position.
5297, 5391, 5472, 5485, 5536, 5548, 5567, 5864, and 6213.)
145