Other Operations - Sony MHC-GNX100 Operating Instructions Manual

Other operations
To
Stop playback
Pause playback
Select a nack
Select an album
of MP3 audio
tracks
Find a point in a
track D21
Select a disc
when playback is
stopped
Switch to CD
fimction from
another source
and start
playback
amonmtically
when there is a
disc
Exchange other
discs while
playing
Remo,'e a disc
Do this
Press •
Press ||. Press || again to resume
playback.
TI.II'II _ _
clockavise
or
cotmtelclockwise (or press
or I_P.t+ on the remote
repeatedly).
Turn and hold ALBL'M +/
clockwise or cotmterclockwise
and release it at the album you
warn (or press ALBUM +/ onthe
remote repeatedly)
For andio CD, lure and hold
_ clockwise or
cotmtelclockwise and release it at
the point you want (or press
or _ repeatedly on the remote).
For MP3 audio tlack, press _ or
repeatedly on the remote
Press one of the DISC 1 _ 3
buttons or EX-CHANGEiDISC
SKIP (or DISC SKIP on the
remote).
Press one of the DISC 1 _ 3
buttons (Automatic Source
Selection)
Press EX-CHANGEiDISC SKIP
Press j" OPEN/CLOSE
1)The elapsed playing time *nay not be displayed
conectly depending on the MP3 audio tlacks.
2) (MHC-GNX88/GNX77iGNX66 only)
You cannot find a point in a track when playing a
CDG.
Notes
• You cannot change the play *node during playback.
• Some time may be needed to strut playback of discs
recorded in complex configurations such as many
layers
• When the disc is loaded, the system reads all the
tracks on that disc If there are many albums or non-
MP3 andio tracks on the disc, it may take a longer
time for playback to begin or for the next MP3 audio
tracks to sta*t playback.
• You are recommended not to save other _,pes of
tracks or tmnecessary albmns on a disc that has MP3
audio tracks.
• When nan'dng the MP3 audio tracks, be sure to add
the tile extension ".MP3" to the file name
• An albtun that does not include an MP3 mnlio track
is skipped
• If you save up the extension ".MP3" to a track other
than MP3 audio tracks, the system cannot recomfize
the track properly and will genmate a random noise
which could damage yom speaker.
• This system can play back MP3 audio tracks in the
fonnat of MPEG 1 Audio Laym 3, MPEG 2 Audio
Layer 3 and MPEG 2.5 Audio Layer 3.
• The maximum nmnber ofalbmns on a disc which can
be recognize by this system is 150 (including root
albmn)
• The maximum nmnber of MP3 audio tracks and
albmns on a disc which can be recognize by this
system is 300.
• Depending on the encoding/writing software,
recording device, or the recording media used at the
time an MP3 audio tlack is recorded, you may
encotmter problems such as cannot play back, sound
imermptions and noise.
Tips
• When you press CD m one of the DIS(' 1 _ 3 buttons
to switch to "CD" fimction from "TL'NER" fimction,
you may require a longer time to access the disc. In
the case, set the CD powm manage fimction to "CD
POWER ON" (page 20).
• If you press CD while tile system is turned off, the
s_teln turns on automatically and "CD" is selected
as the flmction.
• You can also press FUNCTION on the remote
repeatedly to select "CD"
• (MHC-GNX88iGNX77'GNX66 only)
When you play back a CDG, some operation may
canse image distortion on tile video output.
• Dining Shuffle Play, some tracks may be played
back repeatedly
16GS