Other Operations - Sony CMT-NEZ5 Operating Instructions Manual

-- Program Play
You can make a program of up to 25 steps.
You can synchro record the programmed tracks
onto a cassette tape (page 16).
1
Press CD (or FUNCTION repeatedly) to
switch the function to CD.
2
3
Press PLAY MODE in stop mode
repeatedly until "PGM" appears,
Press I<1<1 or _ repeatedly until the
desired track number appears.
When programming the MP3 andio tracks,
press C=1 + or to select album, then press
I'_ or _ repeatedly tmtil the desired
track number appears.
-t/ I -t
Selected track Totat playing time
number (including selected track)
4
5
6
Press ENTER,
The track is programmed.
The program st_p number appears,
followed by the last programed track
mmlber and the total playing time.
To program additional tracks, repeat
steps 3 and 4.
Press IP _ (or CD/IP_II on the unit).
Program Play starts.
Other operations
To Do this
Cancel P_omam Play Press PLAY MODE in stop
mode repeatedly until both
"PGM" and "SHUF"
disappears.
Erase the program Press CLEAR in stop
mode.
Each time you press the
button, a track is cleared
flom the end of the
program.
Add a tlack to the end of Pertbnn steps 3 and 4 in
the program stop mode.
Tips
• The program
you made remains after Program Play
finishes To play the same program again, press
(or CDiD_'_|| on the unit). However, the program is
cleared when you open the CD compamnent
• -- . "appears when the totalCD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over, or when >_u select an
MP3 audio track.
O
I
11c8