Deactivating The Demonstration; Inserting Batteries; Positioning The Speakers - Sony SHAKE-X30D Operating Instructions Manual

Deactivating the
demonstration
To deactivate the demonstration
while the system is turned off, press
DISPLAY repeatedly to select the no
display mode (Power Saving Mode)
(page 24).

Inserting batteries

Insert the two supplied R03 (size
AAA) batteries, matching the
polarities shown below.
Note
• • Do not mix an old battery with a new
one or mix different types of batteries.
If you do not use the remote control
• •
for a long period of time, remove the
batteries to avoid damage from battery
leakage and corrosion.
To operate the system using the
remote control
Point the remote control at the unit's
remote control sensor.
20
GB
Positioning the
speakers
To obtain optimum performance
from the system, we recommend
you to place the speakers as shown
below.
 Unit
 Left speaker (L)
 Right speaker (R)
 TV
0.3 m
Note
Check the speaker type by referring to
• •
the speaker label ("L" or "R") on the rear
panel of the speaker.
To obtain optimum Party Light effects,
• •
we recommend you to place the
speakers from the wall as shown below.
0.3 m
45 cm