Cleaning The Air Filter - BOXLIGHT Beacon CP720e Owner's Manual

Multimedia lcd projector

Hide thumbs Also See for Beacon CP720e:

Table of Contents

Cleaning the Air Filter

A. When the air filter becomes clogged with dust, etc., the projector may

overheat and turn itself off to prevent internal damage.

When cleaning the filter, stand the projector up on its side to prevent dust

from entering the projector. Use a vacuum to remove the dust from the

outside of the air filter. Do not operate the projector with the air filter

removed.

B. Clean the air filter every 100-hour s.

*If the filter is difficult to clean or if it is deteriorating, it should be replaced

1.Remove the filter cover from the bottom of projector.

2.Pull out the air filter.

3.Install the new air filter.

Downloaded From projector-manual.com Boxlight Manuals

Multimedia LCD Projector

Air filter

-50-

Table of Contents

Do you have a question about the Beacon CP720e and is the answer not in the manual?