Connecting The Power Cable - BT DIVERSE 1010 User Manual

4 Mounting the back-up box
If required, you can mount your Diverse 1010
back-up box along your skirting board.
Using the template at the back of this guide,
•
mark then drill two holes for the 2 screws
and rawlplugs (if you need them).
Insert the screws, leaving about 5 mm
•
sticking out to hang the back-up box from.
Skirting board
Wall
Screws
Wrap any loose cord belonging to the back-up
box around the base before attaching to the
skirting board.
Attach the back-up box by hooking it
over the screws protruding from the
wall.

5 Connecting the power cable

Plug the power cable into the power socket on
the underside of your Diverse 1010. Take care
that the telephone line cord and power cable
plugs are connected to the correct sockets.
Incorrect placement could damage the unit.
The Diverse1010 will not operate if there is a power
failure and back-up batteries have not been fitted.
6 Plug the 3 pin adaptor into a
mains power socket and switch on
Setting up
7